Westermo EDW-120 Uživatelský manuál

©Westermo Teleindustri ABwww.westermo.comSerial AdapterUser Guide 6616-2211EDW-120

106616-2211IntroductionThe EDW-120 is an Industrial Ethernet to serial adapter. The serial interface has two parallel RS-232 ports. The Ethernet inte

116616-2211On the network side the EDW-120 has two serial server applications implemented at each RS-232 port. The servers listen at different local T

126616-2211For more information on applications and technical data visit www.westermo.com. The Web tool also includes an integrated help where all fu

136616-2211Product descriptionThe EDW-120 is an industrial Ethernet to serial interface adapter designed for harsh environments. It allows serial devi

146616-2211The local IP address of the unit can be configured by using a terminal program such as Windows Hyper Terminal.New Connection - Hyper Termi

156616-2211Getting startedIP AddressThe default IP address of the EDW-120 when delivered is 169.254.100.100 Default port 9000 (A: RS-232) Default port

166616-2211Username and Password for configurationThe EDW-120 is username and password protected. These are used when connecting with Web browser duri

176616-2211Restore Factory default settingsNote! This will clear your customized settings. The factory default settings can be restored using DIP-swi

186616-2211Configuration by Web ToolThe EDW-120 includes an easy-to-use Web configuration tool. The Web tool is very intuitive and includes useful hel

196616-2211Diagnostics via TelnetThe EDW-120 provides the user with diagnostics information via a Telnet connection on port 23.Information presented t

26616-2211Legal informationThe contents of this document are provided “as is”. Except as required by applicable law, no warranties of any kind, either

206616-2211Short description of TCP and UDPUser Datagram Protocol (UDP)UDP provides a connectionless datagram service. This means that the arrival of

216616-2211Packing algorithmWhen data arrives at the serial port of the EDW-120 there must be one or more criteria fulfilled to trigger the EDW-120 t

226616-2211Interface specifications* To minimise the risk of interference, a shielded cable is recommended when the cable is located inside 3 m bound

236616-2211* To minimise the risk of interference, a shielded cable is recommended when the cable is located inside 3 m boundary to the rails and con

246616-22114-position DescriptionNo. 1 CommonNo. 2 +VANo. 3 +VBNo. 4 Common9-position Direction DescriptionNo. 1 N/C Not connected (DCD)No. 2

256616-2211LED Status DescriptionPWR OFF No internal power ON Internal Power OKTD (A and B) OFF No serial data transmitted from A and B: R

266616-2211S1* DIP-switchDIP-switch settingsBefore DIP-switch settings:Prevent damage to internal electronics from electrostatic discharges (ESD) by d

276616-2211CoolingThis unit uses convection cooling. To avoid obstructing the airflow around the unit, use the following spacing rules. Minimum spacin

286616-2211ApplicationsPowerSDRAM8 MBFLASH2 MBDIP-switchJTAGPROCESSORDEBUGDataAddressCTRLMACXTALPHYXTALCLKRESET5 V = >3.3 V3.3 V = >1.5 VPowerAP

296616-2211One to many using UDP using broadcast or multicastPoint to point using UDP connectionDescriptionThe one to many function can be used in pla

36616-2211SafetyBefore using this unit:Read this manual completely and gather all information on the unit. Make sure that you understand it fully. Che

306616-2211Communication one to many using TCP IP address:port = Com XIP address:port = Com YIP address:port = Com ZVirtual IPDescriptionMany legacy s

REV. E 6616-2211 2014.11 Westermo Teleindustri AB, Sweden – A Beijer Electronics Group CompanyFor complete contact information, please visit our

46616-2211GeneralThis unit is intended for use in Zone 2 hazardous location only.MarkingBaseefa 14ATEX0294X II 3 G Ex nA IIC T4 Gc IECEx BAS 14.0

56616-2211RatingsPower 12 – 48 VDC; 200 mAAmbient temperature –25ºC ≤ Ta ≤ +70ºCIngress protection (IP) IP21Maximum surface temperatur 135ºC (tempe

66616-2211SPECIAL CONDITION FOR SAFE USEAmbient temperature:This unit is designed for use in extreme ambient temperature conditions as follows: –25ºC

76616-2211Agency approvals and standards complianceFCC Part 15.105 Notice:This equipment has been tested and found to comply with the limits for a Cl

86616-2211 Westermo Teleindustri AB Declaration of conformity Org.nr/ Postadress/Postal address Tel. Telefax Postgiro Bankgiro Corp. ident

96616-2211Type tests and environmental conditionsElectromagnetic CompatibilityPhenomena Test Description Test levelsESD EN 61000-4-2 Enclosure contact